Training Voice Recognition - Kyocera Switch_Back Switch_Back User Manual

To wake up the phone:
Say " " and listen for a tone.
1. Wake Up
Say " " again until you hear two tones.
2. Wake Up
If the phone does not recognize your
"Wake up" command, see "Training voice
recognition" on page 60.
Answering the phone
You can set your hands-free headset to (1)
answer automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer automatically.
This setting also works with the portable
Note:
hands-free headset.
→
• Select
Menu Settings
→
Call answer After 5 seconds
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free headset.
→
• Select
Menu Settings
→
Auto-Answer Disabled
To activate the Voice Answer setting:
→
Select
1. Menu Settings
.
Voice answer
Highlight
2. Enabled
60
→
Accessories
.
→
Accessories
.
→
Call options
and press .
To answer a call:
When you receive an incoming call, the phone
responds: "Incoming call, answer?" If the caller is
recognized as a contact entry in your phone, then
the phone says "Incoming call from
(Name), answer?"
• Say "
Yes
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
• Say " " and press
No
the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
main screen.
→

Training voice recognition

If your phone is having trouble recognizing your
voice, you can train it with the commands
, and
No Wake up
Select
1. Menu
Select
2. Voice training
→
Read the message and press the left softkey
3.
returns you to the previous screen.
→
Select
4. Train All
Follow the prompts for each word until
5.
training is complete.
" or press any key except
to silence
.
→ →
Settings Call options
.
to select and continue.
OK
or the item you want to train.
Using Voice Recognition
.
,
Yes
.
Cancel