Sprint Hotspot; Set Up Sprint Mobile Hotspot; Connect To Sprint Mobile Hotspot; Configure Sprint Mobile Hotspot - Kyocera Milano User Manual

Sprint Hotspot

Sprint Hotspot allows you to turn your phone into a Wi-Fi hotspot. The feature works best when
used in conjunction with data services.

Set Up Sprint Mobile Hotspot

Connect to Sprint Mobile Hotspot

Configure Sprint Mobile Hotspot

Tethered Mode
Set Up Sprint Mobile Hotspot
1. Press Home
2. Touch Portable Wi-Fi hotspot and place a check mark in the adjacent field to activate
the service.
Using both data service and Hotspot drains your device's battery at a much faster

rate than when using any other feature combination.
Note: The best way to keep using the device as a hotspot is to have it connected to a power
supply.
Important: Write down the passkey (password) for this WEP/WPA/WPA2 PSK
communication (shown onscreen).
Connect to Sprint Mobile Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your device hotspot from the network
list.

Your device name can be changed by pressing Home
Sprint Hotspot > Network SSID.
3. Select this device and follow your onscreen instructions to enter the passkey (provided
on the Sprint Hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Configure Sprint Mobile Hotspot
1. Press Home
2. Set the following options:

Network SSID: Sets your network name.
Web and Data
, and touch > Sprint Hotspot > OK.
, and touch > Sprint Hotspot.
118
and touching >