Getting Started; Finding Your Phone's Serial Number; Installing The Battery - Kyocera MARBL User Manual

1 G
ETTING
Finding your phone's serial
number
To activate your Virgin Mobile account, you
need your phone's serial number. To locate
the number:
Make sure your phone is turned off.
1.
Hold the phone face
2.
down.
Holding the phone face
3.
down, press down with
your thumb on the battery
cover and slide it off.
If necessary, remove the battery by pulling
4.
back on the top edge of the battery.
Your phone's serial number (the ESN) is
5.
located just below the first barcode inside the
phone, next to the letter "D." It is an 11-digit
number.
Write down the ESN.
6.
Replace the battery (see
7.
battery" on this page).
User Guide for the MARBL Phone
S
TARTED
"Installing the

Installing the battery

Your phone comes with a removable lithium ion
(LiIon) battery.
Fully charge the battery before
using the phone.
To install the battery:
Hold the phone face
1.
down.
Holding the phone face
2.
down, press down with
your thumb on the battery
cover and slide it off.
Place the battery in the
3.
phone casing with the
metal contacts toward the
bottom of the phone.
Slide the battery cover on
4.
and snap it into place.
Before you remove the
Note:
battery, make sure the phone
is powered off.
1