TCSM oil mist collector is for machine tools to filter oil mist and recycle oil or coolant. Each type of CS series have the characteristic to recycle oil. Patented cyclone design allows 90% oil mist to be solidified as oil drop through physical dash theory for first cutting liquid recycle. Then the small oil drops will be brought upward to the filter kit for filtration and second recycle to ensure the maximum recycle ability.
Oil mist collector CS series.. 1. Open Box: on plane place with word on right direction. something to cover on flow, prevent bottom screw scratch flow. Then open box and pull out oil mist collector from the top side. Place oil mist collector on flow carefully.
Oil mist collector CS series.. 1-1 Assembly Tools Prepare Assembly Tools Tools Purpose Suggest size Substitute Tool Qty. Electric drill Drilling a pilot hole Hydraulic Open an oil mist outlet hole φ125mm Any other tools which could drill on cover open same hole.
Oil mist collector CS series.. 1-5 Optional Accessories Accessories Purpose Type Note Specification Qty. If space on Independent Hold oil mist collector All Types Height:1700mm support kit machine tool is not enough for oil mist collector or cannot install directly, it suggest using this support kit.
Oil mist collector CS series. 2-1Installation outfit We have two ways to installed oil mist collector. First is “Direct Install”. It is the way with best efficiency. Install oil mist collector direct on machine tools. Since the oil mist flow did not through any pipe, it got best discharge. Direct Install like Pic.1 showing.
Page 8
Oil mist collector CS series. Overall Dimensions (Direct Install) CS900-MKI 3800mm 150 mm 9 mm 35 mm 100 mm 200 mm >1000 mm CS900-MKII 3800 mm 150 mm 9 mm 35 mm 100 mm 200 mm >1000 mm CS900-PLUS 3800 mm 150 mm 9 mm 39 mm...
Oil mist collector CS series. 2-3Well installed sample Black Support kit Black Support kit side install (With customization intake hole ) White L type support kit Customization Support kit Direct Install Indirect Install...
CS2000 series locked with nuts with 4 anti-vibration feet below the oil mist machine Thermal sensor CS series It is additionally installed on the machine, using the sensor to sense the temperature in the processing room of the machine tool.
Page 13
Oil mist collector CS series. Outlet Electrostatic filter The product that replaces CS-900、CS1200 series the Outlet Filter. It is installed above the oil mist collector. No consumables, only needs to clean the filter element.
Oil mist collector CS series Regular Check Visual inspection for oil leakage / air leakage, please check all holes and joints Cable outlet 2. Whether the filter cotton or filter element is damaged Filter cottons for CS-900/2000/3000 series have three filter cottons.
Page 16
Oil mist collector CS series 3-2Maintenance Replacing or cleaning the filter: Step 1.Unscrew the safety screw , The safety screw can be fixed on the buckle.. Take off upper cover after open the buckle. It should look like the picture on the left after open the locker..
Page 17
Oil mist collector CS series Pick up the cover Place the cover on the table upside down.,take off filter cotton follow arrow direction left pic. Showing.
Oil mist collector CS series 3-3 Filter Maintenance Step 1: Bleach dilute with water at a ratio of 1: 3, and soak the filter cotton in it about 30-40 minutes. *Do not use acid bleach Step 2: Rinse bleach the salad with water, then dry the filter with your hands.
Oil mist collector CS series 3-4Maintenance list Time Each 300H Each 600H 6000H Type Filter cotton set Clean Replace CS900-MKI Oil tray Clean Filter cotton set Clean Replace CS900-MKII Oil tray Clean Filter cotton set Clean Replace CS900-PLUS Oil tray...
Page 20
Oil mist collector CS series Exhaust air flow significant reduce Filter blocked Clean or replace the filter ( Without Outlet Filter) ※ If you have other questions, please contact service dept..
Oil mist collector CS series 5. Machine Type List & Technical Data Type CS 900 CS 900 CS 900 CS 1200 CS 2000 CS 3000 Unit MKII PLUS MKIII MKIV Specification Maximum static 1190 1200 1280 1430 2660 4000 pressure...
Oil mist collector CS series 6. Sign instruction Sign instruction Sign Depiction Place Note On the front of the oil Company LOGO mist collector Technology Below the Concern company Service logo Multiplicity Will be On the back Oil mist machine...
Oil mist collector CS series Product Warranty Product name: Product model: Product serial number:: Year Delivery date: Warranty period: one year Warranty content: 1. Full machine warranty without consumables 2. If the machine is damaged due to improper operation during the warranty period, it is not covered by the warranty.