Download Print this page

CALRAD Electronics 72-149 Quick Start Manual

Ethernet over rg59, rg6u coax extender, 10/100mbps

Advertisement

Quick Links

Product Instructions
Transmitter\ Receiver
Features \ Technology
The 72-149 provides a simple solution for providing ethernet connectivity over RG59 \ RG6u coax. Extends any networking devices
up to over 1,600 ft. at 100Mbps supports Full Duplex and Half Duplex modes. The 72-149 is completely transparent to all protocols
and applications. Works with IP CCTV camera's, VOIP Phones and all consumer based IP technologies like Computers, Smart TV's,
Digital STB's, Network Switches, Wireless Access Points, etc.. Includes two Bi-directional Transmitter and Receiver units each unit
acts as a Transmitter and or Receiver. Easy to configure dip switches for connectivity options. 1 x L.E.D. Power Indicator, 2 x Mode
settings L.E.D. indicators, 2 x RJ45 network data L.E.D. indicators. Includes 2 x 72-149 Transmitter\Receiver units, 2 x 12Vdc power
supplies.
Typical Hookup
MAX
Cat5e, Cat6
100 Mbps
429 ft.
10 Mbps
825 ft.
UTP Cable
Example(A)
IP CAMERA
Example(B)
COMPUTER
Specifications
Network Standards: IEEE 802.3 10 BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Internet, IEEE
802.3 bw 100BASE-T1 Ethernet, IEEE 802.3 Nway Auto-Negotiation, IEEE 802.3x Full Duplex
Operation and Flow Control, IEEE 802.3az Energy Efficient Ethernet.
Data Rate: 10Mbps \ 100Mbps, Supports: Auto MDI\MDI-X
RJ45 Distance Cat5e (Max): 100BASET-TX (429 ft.) / 10BASE-T (825 ft.), 100BASE-T1 (900 ft.),
Long Distance 100 Mbps (1,650 ft.) / 10 Mbps (2,640 ft.).
Ethernet Connector: 1 x RJ45 Jack, Built-in 1.5KV (Line to Line) Surge Protection
Coaxial Connector: 1 x BNC 75 Ohm, Built-in 30KV (ESD) and 30A (Lightning) Surge Protection
Panel L.E.D. Indicators: Green (Power), Blue (Mode1, Mode2)
Ethernet RJ45 L.E.D. Indicators: 100 Mbps (Green), 10 Mbps (Yellow)
Power Supply: 2 x 12Vdc, 0.5Amps
Dimensions: L-3.55" x W-1.93" x H-1.0",Color: Black, Mounting: Single Mounting tab with 3 holes
All specifications subject to change without notice
Transmitter\ Receiver
For all the latest product information visit our website at: www.calrad.com
(Point to Point Transmission)
BNC
Male
BNC
Ethernet
Jack
Jack
Ethernet Extender
CALRAD
72-149
Part No.
Ethernet over Coax Extender
Transmitter\Receiver
1
2 3 4
1
2 3 4
ON
ON
12Vdc
Power
FUNCTION
1
LINK SPEED
10M
100M
Supply
2
ETHERNET
OFF
ON
3
100BASE-T1
OFF
ON
4
LONG DISTANCE
OFF
ON
72-149
Power
Function
12Vdc
Settings
(Dip Switches)
L.E.D.
Indicators
Power Supplies
RG59, RG6U
Coax Cable
MAX
BNC
100 Mbps
1,650 ft.
Male
10 Mbps
3,300 ft.
BNC
Jack
Network Data
Ethernet Extender
Green, Yellow
CALRAD
Status L.E.D.'s
Ethernet over Coax Extender
1
2 3 4
ON
12Vdc
Power
FUNCTION
1
LINK SPEED
Supply
2
ETHERNET
3
100BASE-T1
4
LONG DISTANCE
Power
12Vdc
L.E.D.
Indicators
CALRAD
Electronics
For technical assistance
call: 323-465-2131
72-149
Part No.
Ethernet over
RG59, RG6U
Coax Extender,
10/100Mbps
Cat5e, Cat6
UTP Cable
Ethernet
Jack
NVR
72-149
Part No.
Transmitter\Receiver
1
2 3 4
ON
10M
100M
OFF
ON
SWITCH
OFF
ON
OFF
ON
72-149
Front View
Function
DC 12V
Settings
+
(Dip Switches)
Rear View
100M
1
10M
Package Contents
2 x 72-149 Ethernet Extenders
2 x DC Power Supplies
72-149-02212020-WB
Copyright C
ALRAD
R
MAX
100 Mbps
429 ft.
10 Mbps
825 ft.
Example(A)
Example(B)
ON
SETTING
1
STATUS
2 3 4
1
2
STATUS
ON
2
Page 1 of 2
E
2020
LECTRONICS

Advertisement

loading

Summary of Contents for CALRAD Electronics 72-149

  • Page 1 The 72-149 provides a simple solution for providing ethernet connectivity over RG59 \ RG6u coax. Extends any networking devices up to over 1,600 ft. at 100Mbps supports Full Duplex and Half Duplex modes. The 72-149 is completely transparent to all protocols and applications.
  • Page 2 No Power: Verify DC Power (Power Supplies) are plugged in and are producing 5Vdc on the coax power plugs. No Ethernet Connectivity: Verify Power to both 72-149 units, check all Coax Connections check ethernet cables and verify dip switch settings are correct. Check all L.E.D.