Table of Contents
Advertisement
B
2. Adjust the flap in position B.
3. Put back the drawer in the recess.
When you use the liquid detergent:
•
Do not use gelatinous or thick liq-
uid detergents.
•
Do not put more liquid then 120
ml.
•
Do not set the programme with
prewash.
•
Do not set the delay start.
When the flap is in position B and you want to use
powder detergent:
1. Remove the drawer.
2. Adjust the flap in position A.
3. Put back the drawer in the recess.
SETTING A PROGRAMME
1. Turn the programme knob and set the
programme:
•
The indicator
18
A
flashes.
•
The display shows the level of the Time
Manager, the programme duration and the
indicators of the phases of the programme.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press
.
•
The indicator of
stays on.
•
The indicator
display.
•
The programme starts, the door locks, the
display shows the indicator
•
The drain pump can operate for a short time
when the appliance fills water.
After approximately 15 minutes from
the start of the programme:
•
The appliance adjusts automatically
the programme duration agree with
the laundry load.
•
The display shows the new value.
STARTING A PROGRAMME WITH THE
DELAY START
1. Press Delay Start again and again until the
display shows the delay you want to set.
The related indicator comes on the display.
2. Press
:
•
The appliance starts the countdown.
•
The door locks, the display shows the
indicator
.
•
When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the delay start before you press the
. To cancel the delay start:
•
Press
to pause.
•
Press Delay Start until the
display shows
•
Press
programme immediately.
.
stops to flash and
starts to flash on the
.
to set the appliance
'.
again to start the
Advertisement
Table of Contents
