Page 2
Ba�ery installa�on and charging instruc�ons 1. Remote control ba�ery installa�on According to the electrode AA*3 instruc�ons (+,-) of the ba�ery box, insert the ba�ery correctly (as shown) 2. Lithium ba�ery charging 1) Remove the aircra� ba�ery from the aircra� fuselage; (2) Connect the ba�ery to the dedicated punching wire,and then insert the punching wire into the computer USB port and other punching equipment;...
Page 3
2. Aircra� blade installa�on Please install the propeller in the direc�on of the picture on the right, and be sure to �ghten the screws a�er installing in place 3. Installa�on of aircra� protec�on frame Align the protec�ve frame with the posi�on of the aircra�'s boom (as shown in the figure) and install and fasten it.
Page 4
Quick Start Guide (FOR REMOTE CONTROL) 1) Install The Landing Gear 2) Power Aircra� Press and hold the power switch un�l the aircra�’s lights turn on. 3) Turn On The Remote Red LED ON Short press the remote controller switch bu�on Note: the four lights of the aircraft are always on, that means automatic frequency pairing is successful.
ALWAYS REFER TO INSTRUCTION MANUAL FOR COMPLETE DETAILS 5) Flight control *Thro�le (Le� joys�ck) *Rotate le� and right(Le� joys�ck) *Forward and backward(Right joys�ck) *Fly le� and right(Right joys�ck) 6) How to land Method 1: Short press "one key landing" bu�on. Method 2: A�er doing the unlock gesture, if you want to stop the motor, pull down the le�...
Method 3: Pull down the le� joys�ck to the lowest posi�on un�l the propellers stop turning. Emergency Stop 1. When the tilt angle of the aircraft exceeds 60 degrees, the aircraft will stop rotating; 2. When the propeller is stuck, the motor will stop rotating automatically.
8) One key to backward Press this bu�on and hold for 2-3 seconds, the aircra� will retreat along the tail direc�on. At this �me, when you move the right s�ck in any direc�on, the aircra� will stop con�nuing to retreat. One key to backward Attention: This function can only be done backwards, it can’t return to the...
Page 8
Quick Start Guide (FOR REMOTE CONTROL) Do not recommend beginners to control the aircra� with the APP Step 1: Download the app Scan QR code below using your device camera, corresponding to APP Store or Google Play Store and download the “WIFI UAV” applica�on for free.
Page 9
Step 6: Gyroscope calibra�on Please click the icon ,if the 4 LED of aircra� flash quickly un�l the LED become stay on, gyroscope calibra�on is successful. *Other func�ons *Gravity Mode:Gravity Mode: In this mode, as the phone �lts and swings forward, the aircra� will be induced by the movement to fly forward.
Need help?
Do you have a question about the BC 5C and is the answer not in the manual?
Questions and answers