Page 1
4) Drag åt skruven på fästet lite lätt med 5) Montera tillbaka plasthylsan. 6) Tag bort gummifoten på den undre de- liten krysskruvmelsel. (Bits PH 0) eller len av kryckan. Torx TT10 Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se...
Page 2
Skruva ej ihop klämmorna helt. dragning. Det ska vara en lite glipa kvar. 13) Fäst kryckan med det färdigmonte- rade fästet på rullstolen. Upprepa proceduren på en eventuell an- dra krycka. Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se...
Page 3
5) Remount the plastic hose. 6) Remove the rubber shoe from the With a small philips head screw driver. lower part of the crutch. (Bits PH 0) or Torx TT10 Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se...
Page 4
There should be a little gap between them. 13) Attach the crutch to the wheelchair with its mounted attachments. Repeat the procedure on the other crutch, if there is one. Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se...