BRAHMA EG25 Series Manual

EG25* ... EG30* ... SERIES
SOLENOID GAS VALVES WITH 3/4" AND
1" CONNECTIONS
PRESSURE UP TO 500 mbar
2708_r04
AND OPERATING

GENERAL DESCRIPTION

This series of solenoid valves are of normally closed type,
suitable for civil and industrial applications, supplied with
alternate or direct current and inclusive of inside rectification
circuit which permitted to make actions as silent as possible;
a wire-net filter on the inlet avoids the entrance of dirt
of > 1 mm.
There is the possibility to have a fast opening or a slow
opening valve (obtained by special hydraulic shock-
absorber), with flow adjustment and fast opening initial flow
adjustment.
All versions can be connected with suitable fixing brackets,
provided with by-pass solenoid valves and pressure plugs
upstream and downstream.
Gas valves of this series, conforming to EN161, have a CE
type Certificate (CE Reg. N° 63AQ0626) in accordance to
European Directives 90/396 and 93/68.
− EC- type certification in accordance with the new
European Gas Appliances Regulation (EU) 2016/426
(GAR);
− conformity to EC Low-voltage directive 2014/35/EU

TECHNICAL FEATURES

Class:
Group:
Supply voltage (1):
Operating temperature:
Closing time:
Opening time:
Protection degree:
Mounting:
Body:
Core hitch:
(1) Versions with different supply voltages are available.
A
2
230 Vac / 50-60 Hz
110 Vac / 50-60 Hz
-10°C / +60°C
 1s
 1s (quick opening
versions only)
GMO IP54
GFD IP54
vertical and horizontal
die-cast aluminium
PG9
1/6