Advertisement
1.
While pressing and holding
the same time. Release
then release the
OPERATION MODE" for the indoor unit to run independently.
button,
will be blinking.
NOTE
:
(1) During "DISPLAY OPERATION MODE",
(2) When operation stops, "DISPLAY OPERATION MODE" is canceled.
(ON/OFF) button and
(RESET) button only and make sure that all marks on the LCD display are indicated,
(ON/OFF) button and
(UP/DOWN)
blinking
"
blinks on LCD of remote controller.
- 123 -
(UP/DOWN) button, press
button.
Remote controller now enters "DISPLAY
Please ensure that when pressing
se ensure tha
( RESET) button on
" "
blinking
Advertisement
