Instructions for use
1. Turn off the massager before replacing another massage head.
2. Your massager comes equipped with 4 a�achments (Figure 1). A�ach the different heads by
pressing the head un�l it is totally inserted.(Figure 2), detach the installed massage head by
twis�ng an�-clockwise and pulling out (Figure 3).
! Note: Always turn off the device while replacing the heads.
Fig.2
3. Turn on the massager by opera�ng the control bu�ons(insturc�ons as below)
4. Apply the massager head lightly to the area you wish to treat. Move the unit slowly,
holding it over the targeted area. Treat the area for a short period of �me and move to
another area. NEVER treat the same area for longer than 1 minute.
5. To turn the unit off by pressing the power bu�on. For your safety the device will automa�cally
turn off a�er 15 minutes of con�nuous use.
Intensity indicator light
Fig.3
Power/Intensity Bu�on
Press to cycle the intensity
Level 1 to Level 5 and turn off
the device.
Power Indicator light
Turn red when power is low,
Otherwise it'll stay green
4
Need help?
Do you have a question about the SL-491 and is the answer not in the manual?