Slide Both The Bottom And Top Cross Bar Into The
Central Uprights - Attach Cross Bars With M8 Bolts
( Do Not Completely Tighten Bolts)
ASSEMBLY INSTRUCTIONS
TF3212
G)
Layout Left, Right and Central Leg Upside Down On a Flat
Surface. Slide Central Support Beams Into Legs - Attach
Support Beams With M8 Bolts ( Do Not Completely Tighten
Bolts ) . Once The Frame Is Sitting Flush On the Flat
Surface, Tighten All Bolts Completely.
CD
M8•16H 48pcs
M5•20H 26pcs
M12
lpcs
lpcs
M6
M6
lpcs
Slide Both The Bottom And Top Cross Bar Into The Left &
Right Hand Side End Uprights - Attach Cross Bars With
¢16
lpcs
M8 Bolts ( Do Not Completely Tighten Bolts)