Chapter1 Acceptance And Installation; Confirm Package Contents; Instrument Size Introduction - ITech IT8912E User Manual

Chapter1 Acceptance and Installation

1.1 Confirm package contents

Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Device name
Electronic load
Power line
USB
communication
line
Factory
alignment report
IT8912E electrical load has optional fittings for individual sales. Detailed
descriptions of each fitting are as shown below:
Device name
Installation fitting for
mounting instrument
to rack

1.2 Instrument Size Introduction

The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the electronic load
size.
The detailed size of the electronic load is shown as below.
Quantity
1
1
1
1
NOTE
After confirming that package contents are consistent and correct, please appropriately
keep package box and related contents. The package requirements should be met when
the instrument is returned to factory for repair.
Model
IT-E151/
IT-E151A
Copyright ©ITECH Electronic Co., Ltd.
Model Remarks
-
IT8912E
IT-E171/IT-E The User may select different
172/IT-E173/I power lines based on local
T-E174 outlet specification. For
detailed specifications, refer
to 1.7 Installation of Power
Line.
- -
- Test report before delivery.
Fitting description
When the user is to install the instrument
to a special rack, use this fitting.
Acceptance
and Installation
1