Advertisement
Operating Instructions and Parts Manual
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn the product's
applications and limitations, as well as potential hazards specific to it.
2. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact
OEMTOOLS
for a replacement.
®
3. Keep work area clean and well lit. Cluttered or dark work areas
invite accidents.
4. Keep children away. All children should be kept away from the
work area. Never let a child handle this product without strict adult
supervision.
5. DO NOT operate this product if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if your
judgment or reflexes are impaired while taking drugs. If there is
any doubt, DO NOT attempt to operate.
6. Use safety equipment. Eye protection should be worn at all times
when operating this product. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.
7. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this product. Keep all apparel clear of the product.
8. DO NOT overreach. Keep proper footing and balance at all times
when operating this product.
9. Check for damage. Check your product regularly. If part of the
product is damaged, it should be carefully inspected to make sure
that it can perform its intended function correctly. If in doubt, the
part should be repaired. Refer all servicing to a qualified technician.
Consult your dealer for advice.
10. Keep away from flammables. DO NOT attempt to operate this
product near flammable materials or combustibles. Failure to
comply may cause serious injury or death.
11. Store idle product out of the reach of children and untrained persons.
This product may be dangerous in the hands of untrained users.
12. Maintain product with care.
13. Keep product dry and clean.
14. DO NOT use a damaged product. Tag damaged products
"DO NOT USE" until repaired.
15. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the product's operation.
16. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one product
may become hazardous when used on another product.
17. If damaged, have the product serviced before using. Many
accidents are caused by poorly maintained products.
18. Product service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could create a risk of injury.
19. When servicing a product, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions could create a risk of injury.
20. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the
work area free of obstructions, grease, oil, trash, and other debris.
DO NOT use this product in a damp or wet location.
8/19
2019 OEMTOOLS
®
36" 3-DRAWER SLIDE TOP CART
21. Avoid accidental fire and/or explosion. DO NOT smoke near engine
fuel and battery components.
22. We believe the information contained herein to be reliable.
However, general technical information is given by us without
charge and the user shall employ such information at their own
discretion and risk. We assume no responsibility for results or
damages incurred from the use of such information in whole or in
part. Always refer to specific instructions and technical information
supplied by vehicle manufacturer.
PRODUCT DESCRIPTION
The OEMTOOLS 36" 3-Drawer Slide Top Cart is designed to provide
mobile, secure tool storage.
PRODUCT
24730 / 24731 / 24732
Slide Top Cart
ID
COLOR
24730
Blue
24731
Black
24732
Green
24730 / 24731 / 24732 DRAWER DIMENSIONS AND SLIDE CAPACITY
Drawer
Width
Depth
Size
(In.)
(In.)
Shallow
30
18
Drawer
Deep
30
18
Drawer
Total
SPECIFIC SAFETY INSTRUCTIONS
CAUTION: DO NOT exceed drawer capacity rating (see chart in
Drawer Dimensions, Volume and Capacity section).
CAUTION: ALWAYS place heavier tools in the bottom drawers.
Overloading the top drawers may cause imbalance.
CAUTION: ALWAYS be cautious when maneuvering tool box
through the shop. Large obstructions, cracks in the floor, low ceilings,
etc. may cause the tool box to tip, which could lead to property
damage and/or personal injury
CAUTION: ALWAYS be cautious of pinch points between the
top and bottom unit and between drawers. Never place fingers or
extremities in the drawers while the cart is moving. Keep extremities
clear of the edges of the drawers, openings, and drawer slides when
opening or closing drawers.
CAUTION: ALWAYS lock the casters after moving the units.
CAUTION: ALWAYS be cautious when opening drawers and the
top lid after periods of storage and/or moving the unit. Tools may shift
the drawers and cause unsafe conditions, such as falling tools, pinch
points, and jammed drawers.
WARNING: DO NOT allow the power strip to be submerged or
come into contact with any water or other fluids.
CAUTION: ALWAYS be cautious of items placed on top of the
sliding work surface, as the work surface splits into two separate
surfaces. Items left on the connection point may fall into or off of the
box, leading to personal injury and/or property damage.
2
24730, 24731, 24732
WIDTH
DEPTH HEIGHT
36"
21"
Total
Height
Volume
# of
Volume
(In.)
(Cu. In.)
Drawers
(Cu. In.)
3
1,620
2
3,240
6.1
3,294
1
3,294
3
6,534
WEIGHT
38"
251.3 Lbs.
Total
Slide
Weight
Capacity
Capacity
100 Lbs. 200 Lbs.
100 Lbs. 100 Lbs.
300 Lbs.
Advertisement
