Table of Contents
Advertisement
1. Steps to Activate Device to Use
1.
Switch ON the Device by pressing Power Button (Power LED will glow in Red Color)
2.
Wait for few seconds for GSM LED blinking (Green color). Max it will take 3 min.
3.
Wait for few minutes for GPS LED blinking (Green color). Max 5 min if it already used
in that location or Max 15 minutes for first time use. Device must be kept in open sky
condition to get the GPS Signal.
4. Once all the above conditions fulfilled, device is ready for usage.
5. Device can't be Switch off using the Power button. It can only be switched off using
SMS from the registered mobile no to the Primary SIM i.e. SIM One.
Message to Device
Example
*17,off#
2. SPECIFICATIONS
SPECIFICATION
POWER LED
GSM LED
BLACK BOX
POWER OFF Successful
Device Charging: GREEN
Device Fully Charged: BLUE
GSM Active: GREEN
Return Message from Device
Success
*Device ID, Command ID, status#
DESCRIPTION
Page 21 of 23
Failure
POWER OFF Failed
Advertisement
Table of Contents
