Table of Contents
Advertisement
Select TV SETUP and highlight ADD/
ERASE then Press and release the Menu
button.
ADD/ERASE
AUTO PROGRAM
EXIT
640X480
H:31.4KHZ V:59.8HZ
Select TV SETUP and highlight AUTO
PROGRAM then Press and release the
Auto Program only work under TV MODE.
Menu button.
ADD/ERASE
AUTO PROGRAM
EXIT
640X480
H:31.4KHZ V:59.8HZ
With the MAIN MENU displayed,
Select TV SETUP using the Menu
button :
MAIN DISPLAY
AUDIO
CLOSE CAPTION
PARENTAL CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
640X480
H:31.4KHZ V:59.8HZ
NOTE : This function can ERASE or ADD
the present display's channel.
26
Using the
button, select ERASE or
ADD then Press and release the Menu
button to confirm.
ADD/ERASE
ERASE
Using the
button, select YES or NO.
(No need to press Menu button, The
Autoprogram will Autostart).
AUTO PROGRAM
YES NO
NOTE :
Users need to perform Auto Program
when the source is first connected to
the tuner module to ensure every
Channel is stored in the TV's memory.
TV will go back to the previous tuned
channel after auto scan.
ADD
Advertisement
Table of Contents
