Advertisement
Contents
Connections
8
Move the Sound calibration microphone to position 2,
select "Continue", then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
Audyssey Setup
Place the microphone ear level of the listener seated at the
2nd listening position, which should be no more than 60 cm
away from the 1st position, then select "Continue"...
Ear Height
Back
n Stopping Audyssey
A Press BACK to display the popup screen.
B Press o to select "Yes", then press ENTER.
Front panel
Display
Playback
Continue
Setup
®
Rear panel
Settings
9
Repeat step 8, measuring positions 3 to 8.
0 To skip measuring the fourth and subsequent listening position, press o to
select "Complete" and press ENTER to proceed to step 11.
10
Select "Continue", then press ENTER.
Audyssey Setup
Measurements complete.
Select "Continue" to analyze the data...
Repeat Last Test
Start the analysis and storage of the measurement results.
Analysis takes several minutes to complete.
0
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0 When the measurement results are being saved, make sure the power is
not turned off.
219
Remote
Tips
Appendix
Continue
Index
Advertisement
