Table of Contents
Advertisement
Power Loss
The Delta SG1420 can be opened or closed in the event of a power outage by the following:
CAUTION: Power switch should be in the 'Off' position when manually operating
the gate to prevent hands from being caught in the drive belt pulleys if motor should
happen to start if power is restored.
1)
Manually pull the drive belt around until the gate is in the desired position. Use Care!
Drive belt-pulley is a pinch point!
2)
Turn Auto-Manual switch to 'Auto' and the Power switch to 'On'. On power resumption,
the Gate will automatically resume powered operation.
Spare Parts Order Data
Parts for your Delta SG1420 Gate may be purchased from your installer/dealer or the factory.
Please call your dealer first, as he is most familiar with your application. Required replacement
parts can be located from the attached Spare Parts List.
Try to supply as much data about the part as possible, i.e. dimensional size, threads, voltage,
nameplate data, etc. For control circuits: list model number, serial number (S/N), drawing no.
and customer no. taken from the nameplate on the controller.
Copyright 2001 Delta Scientific Corporation
All Rights Reserved
Document: A2026.3 SG1420 Instructions
Page 8 of 18
Advertisement
Table of Contents
