Tool Menus - Bosch OBD1300 Quick Start Manual

1 0 | Quick Start Guide

6 Tool Menus

The Main Menu and Diagnostic Menu are broken down into the following
menus. Not every function will be on the menus for every vehicle. Some
functions are vehicle specific, so they will not appear on every menu.
Function
Acronyms
Auto-Power
Off
Battery Reset
Charging
System Moni-
tor
Code Lookup
575610 Rev B | 03.2016
Menu
Main, Diagnostic,
Datastream, Diag-
nostic Codes,
Special Tests, On
Demand Tests
System Setup
Special Tests
Special Tests
Main, Diagnostic,
Datastream, Diag-
nostic Codes,
Special Tests, On
Demand Tests
Description
Allows the user to view acronyms
and abbreviations used by the
Scan Tool.
Allows the tool to turn off automat-
ically after a selected amount of
time when tool is not being used.
This function is supported on some
Ford, BMW, and Mini vehicles. This
function sends a command inform-
ing the vehicle that the battery was
replaced. The function only
appears on the menu when sup-
ported by the currently selected
vehicle.
This function is used to monitor
the voltage present on pin 16 of
the OBD II Data Link connector.
Looks up definitions of DTCs
stored in Scan Tool.
Bosch Automotive Service Solutions Inc.
English