Advertisement
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
1
Step 1: attach left side (D) to the back (A). Then attach the
supports (E) as shown on the picture by using the Allen
Bolt (H1) and tighten it with the Allen Key (H4). Continue with
the right side (C) in the same way. Make sure to tighten all
bolts (H1) before you continue with step 2.
2
Step 2: put the seat (B) inside the chair and use the screw (H2)
as shown on the picture, tighten all with a screwdriver.
Advertisement
