Wire Sizing................................................... Page 5
Wire Splice................................................... Page 6
Grounding.................................................... Page 8
TWO-WIRE PATH LAYOUT
Two-wire controllers typically have connections for multiple wire paths enabling the system to power
decoders running in multiple directions. The Weathermatic SmartWire™ two-wire controllers have 3
separate wire path connections. These are labeled 1, 2, & 3 for wire path #1, wire path #2 and wire path
#3 respectively.
Although wire paths can be designed to run in multiple directions, attention should be given to the
limitations on distance that each wire can be installed.
The Weathermatic SmartWire™ system allows you to have several options in cable routing to determine
the most efficient two-wire layout for your project. Maximum decoder to valve distance is 100 feet
(30.5m).
Each two-wire run can be laid out in Straight Run, Complete Loop, Star, or Combination configurations
as shown below.
Last Decoder
Last Decoder
SmartWire
Controller
4 |
P a g e
WEATHERMATIC SMARTWIRE™ TWO-WIRE DESIGN
SmartWire
Controller
STAR
CONFIGURATION
LOOP
CONFIGURATION
Master Valves.............................................. Page 15
Flow Sensors................................................ Page 16
Warranty....................................................... Page 17
Last Decoder
Last Decoder
Last Decoder