Advertisement
3
Using a text editor, insert the following sections into the FAST_PRT.INI file:
; Maps document types to language
[filters32]
ASCII=ASCII
RAW=RAW
TIFF=CCITT
CALS=CCITT
IG=CCITT
; Maps language to language module
[languages32]
ASCII=QFPLNG01.DLL
RAW=QFPLNG02.DLL
CCITT=QFPLNG03.DLL
; Specifies language capabilities
[langcaps]
ASCII=95
RAW=0
CCITT=4095
; Maps document type to filter by language
[ASCIIformats32]
[RAWformats32]
[CCITTformats32]
TIFF=QFPFLT01.DLL
CALS=QFPFLT02.DLL
IG=QFPFLT03.DLL
1
The 32-bit versions run only under Windows 95 or Windows NT.
2
The 32-bit version of the FastPrint Engine does not work with the 16-bit version of the Fast-
Print Interface. This means that Documents Online can use the 32-bit components only
through "scheduled mode."
3
The FastPrint Engine no longer uses Windows Sockets to communicate directly with the
QMS printer. It now directs its output to Windows print queues. This means
a
The print queue names in the FAST_PRT.INI file are no longer used by the 32-bit engine.
b
The queue names shown in the FastPrint Interface are not valid for the 32-bit components.
c
No network status is shown in the FastPrint Engine status dialog box.
d
Port Monitors must be installed to enable network communication with the QMS printers.
e
The CPI PRINTER command must specify a Windows queue for the 32-bit components. This
can be either a local queue name or an UNC printer share name.
Advertisement
