Advertisement
This document contains the following topics:
„ About the QMS ImageServer for WIN32
„ Installing the ImageServer for WIN32 Software
„ Requirements/Limitations/Issues
„ Using the ImageServer for WIN32 Software with the ImageServer SDK 1.1 Windows Utilities
„ For Additional Assistance
The QMS ImageServer for WIN32 consists of 32-bit versions of the ImageServer 1.1 Print Daemon
and FastPrint Engine. The Print Daemon is contained in one executable file:
„ QPDMON32.EXE
The FastPrint Engine consists of the following seven dynamic link libraries (DLL):
„
QFPENG32.DLL - the main engine module
„
QFPLNG01.DLL - the ASCII language module
„
QFPLNG02.DLL - the RAW language module
„
QFPLNG03.DLL - the QMS CCITT language module
„
QFPFLT01.DLL - the TIFF to QMS CCITT filter
„
QFPFLT02.DLL - the CALS to QMS CCITT filter
„
QFPFLT03.DLL - the Intergraph raster to QMS CCITT filter
1
Copy the Print Daemon file QPDMON32.EXE to the \DOL subdirectory on your PC's hard
disk where the QMS ImageServer SDK 1.1 was installed.
2
Copy the seven FastPrint Engine DLLs to the WINDOWS\SYSTEM subdirectory for Win-
dows 95 or to the WINDOWS\SYSTEM32 subdirectory for Windows NT.
Advertisement
