Duracell POWER 1000 User Manual page 4

CHARGING YOUR POWER 1000
Before using or storing the Unit, connect the wall charger to DC Input Port and fully charge
the Unit. The LCD screen will display the charge status, and getting to 100% could take up to 11 hours
depending on the initial battery level. Additionally, the Unit can be connected to a 100W USB-C
charger (in/out USB-C Port) for faster charging. The Type-C USB port has an auto detect function and
no need to press the USB button.
If charging from the car, connect the provided car charger cable to your vehicle's 12V socket (cigarette
lighter port) and to the Unit's DC Input Port. Car Charger Cable provided with the Unit is to be used
only for charging the Unit and not used to discharge or to connect to the car charger output port.
If charging from Duracell's Solar Panel (sold separately), connect it to the DC input using one of
the two plugs provided (Anderson PV connector/DC F6530 plug). The maximum wattage allowed for
solar charging is 195W and the maximum voltage is 30V.
AC ADAPTER
Included
10 11 HOURS
CAR CHARGER CABLE
21 24 HRS 12V 10 12 HRS 24V
SOLAR PANEL CHARGER CABLE
12 13 HOURS
(depending on weather)
Included
(to be used for charging the Unit only)
Not Included
INPUT
DC12-30V
SOLAR PANEL
INPUT
13V/10A
13V/5A
X2