RIDGID HDB6000 Owner's Manual page 15

MAINTENANCE
RECOMMENDED PREVENTIVE MAINTENANCE
WARNING:
!
• The following information provides guidance
for trouble shooting and maintenance under
normal working conditions.
• Unplug the Backpack Vac when cleaning or
replacing the filters.
WARNING:
!
• To reduce the risk of injury from accidental
starting, unplug power cord before performing
any maintenance.
• Check the condition of the power cord before
each use.
UPON RECEIPT
Check the Backpack Vac for any defects, missing or
broken parts. Call RIDGID with this information, along
with any questions you may have.
DAILY BEFORE AND AFTER EACH USE
Check the dry filter bag. Replace the dry filter bag if
it is full. Use only genuine RIDGID replacement filters
to ensure optimal performance. Check the cloth filter.
If dirty, rinse out and air dry before replacing the cloth
filter back into the Backpack Vac. All filters must be in
place to operate the Backpack Vac.
PERIODICALLY
Check the harness for fit and comfort. If harness is
damaged and unusable, contact customer service to
order a new harness.
SP7128-1 HDB6000 ESF 2022.indb 15 SP7128-1 HDB6000 ESF 2022.indb 15
POWER CORD CARE
NEVER stretch the power cord tightly between the
Backpack Vac and the outlet. A power cord that is
stretched or pulled may not function properly, can
damage the power cord or plug, and creates a tripping
hazard. Stop using the vacuum if the cord or plug is
damaged.
DO NOT tie the power cord to the harness body in any
way. Always use the cord retainer to secure the power
cord while the Backpack Vac is in operation.
After vacuuming, unplug the power cord and wind it
up loosely.
• Lay the power cord out, as straight as possible, on
the floor before winding.
• DO NOT wind the power cord up by wrapping it
around your hand and elbow, as repeated winding
in this manner will result in twisted power cord that
is hard to wind and unwind.
15
8/11/22 11:27 AM 8/11/22 11:27 AM