Table of Contents
Advertisement
2) Power up the system without connecting the handle piece.
3) Regular drops of the handle piece.
4) Wrong input VAC.
5) Other manual operating mistakes.
Cleaning the main unit
Using soft wet cotton ball to clean the crust of the machine at least once a week, neutral cleanser is
permitted, but do not let the liquid to permeate into the inside of the machine
Cleaning Treatment Heads
The treatment head should always be kept clean, clean of the tr
treatment. When cleaning the treatment head, you can use wet soft clothes, and then air it to become
completely dry.
Instrument troubleshooting guide
Following list some problem of the machine as well as the solve solution.
1. The system can not function
properly
2.
Turning
black
treatment head
3. Leaking water from the treatment
head
A. Check whether the power cable is well
connected；
B. Check whether the emergency button is
pressed down, turn the button inverse clock
can release it;
C. If can not be solved, please contact the
engineer.
A. The treatment head exceeded the life, please
replace it;
B. Ensure the water flow is normal, please try
within
the
again;
C. The treatment head may be damaged, please
contact the engineer.
The treatment head is damaged, please contact the
engineer.
eatment head is necessary after
each
Advertisement
Table of Contents
