Advertisement
Quick Start Guide
Aquavx™
1. Wire Your Aquavx
1.
Drill holes in the unit enclosure for the power feed as well as for the amount of I/O wiring required. Affix
the necessary conduit fittings and assure proper waterproofing.
2.
Wire 100-240VAC power to the Line (Black), Ground (Green), and Neutral (White) terminals on the
#1700-0101 power supply at the top of the panel.
3.
Attach the black wire from the power supply BAT- terminal to the negative battery post.
4.
Wire I/O connections using the screw terminals on the quick disconnect plugs in their respective
channels. There is a quick reference diagram below the connectors on the swing panel. For more
detailed information, reference the schematic drawings and online manual found at www.cattron.com.
/When ready, power on the unit with the power switch to the right of the I/O connectors.
1.
3.
Configuration Sheets and Manuals Are Available at Cattron.com
Nimble: 9M01-9207-A001 | EN-2022-10-V1
2.
4.
Power
Switch
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cattron Aquavx
Summary of Contents for Cattron Aquavx
- Page 1 There is a quick reference diagram below the connectors on the swing panel. For more detailed information, reference the schematic drawings and online manual found at www.cattron.com. /When ready, power on the unit with the power switch to the right of the I/O connectors.
- Page 2 If your system is preconfigured, the I/O will arrive programmed per the configuration sheet you provided to us. If it is not preconfigured or if changes are required, the Aquavx can be programmed via a locally connected PC, remotely over the cellular network, or the keypad on the unit. Programming instructions can be found in the manual.
- Page 3 Quick Start Guide Aquavx™ Wired Aquavx Configuration Sheets and Manuals Are Available at Cattron.com Nimble: 9M01-9207-A001 | EN-2022-10-V1...
Need help?
Do you have a question about the Aquavx and is the answer not in the manual?
Questions and answers