Pioneer AVIC-W8400NEX/XNUC Service Manual page 60

1
2. Type Setting
A
Before doing "Remote Control Key Test", set the type of steering remote control to be connected in this section.
B
Select type by [VOLUME] button.
Make settings for Type selected by [
Details of Error Code
1 Unknown the current type
2 Fail to change type
3. Learning Wired Remote Control Test
C
The voltage value of System uCom 165 pin (WIRED1), 164 pin (WIRED2) are displayed.
D
The range of the voltage value is 0.000 to 3.300 [V].
Terminal name Initial value
WREMCONT1 Hi
WREMCONT2 Lo
Change the setting of WREMCONT1, WREMCONT2 to [Hi,Lo]
Use [ MODE] button to switch between WREMONT1 and WREMONT2.
*Cause of error
Communication between microcomputer and SOC failed
Learning type steering remote control is not compatible in this model
E
F
60
1
2
MODE] button.
[Hi,Hi]
AVIC-W8400NEX/XNUC
2
3
[Lo,Hi] [Lo,Lo]
Return to Top Menu
3
4
4