Table of Contents
Advertisement
Getting Started
System Set Up
The following is a summary of the steps in setting up the system
for use.
(1). You can fix the system to a mounting fixture using the screw
holes on the sides of the system, use for the system is land
scape mode
(2). Make any required external connections such as the display,
keyboard, and LAN.
(3). Plug the appropriate end of the power cord into the power
connector on the rear of the system and the plug to an
electrical outlet.
(4). Waiting for 3 seconds then press the power switch on the
front panel of the system once to turn on the system power.
(5). If necessary, run the BIOS SETUP programs to configure the
system.
Caution:
In order to boot up system from USB-CD/DVD drive,
please connect USB-CD/DVD drive, turn on computer
power, keep on pressing "F11" key, go into BIOS quick
boot menu, select "USB-CD ROM", WAIT FOR 20
SECONDS, then press enter, system OS will boot up
from USB-CD/DVD drive directly.
Mise en garde:
Afin de démarrer le système à partir du lecteur
USB-CD / DVD, veuillez connecter le lecteur USB-CD /
DVD, allumez l'ordinateur, continuez à appuyer sur la
touche "F11", allez dans le menu de démarrage rapide
du BIOS, sélectionnez "USB-CD ROM" , ATTENDEZ 20
SECONDES, puis appuyez sur Entrée, le système
d'exploitation démarrera directement à partir du
lecteur USB-CD / DVD.
12
TP 10 User's manual
Advertisement
Table of Contents
