Case Matthew Hilton Cross Sideboard Quick Start Manual

Case Matthew Hilton Cross Sideboard Quick Start Manual

Advertisement

Care Instructions

Cross Sideboard – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
This unit is manufactured with either oak, black stained oak or walnut.
Craftsmen manufacture this product and there is variety between each unit. This is
because wood is a natural product, with natural colour and grain variations.
The top, side and drawer faces are matched to ensure a consistent aesthetic
throughout
Natural timber is affected by sunlight; this can can the wood colour to darken.
For this reason (especially if placed in direct sunlight) it is recommended that placing
objects in the same position for long periods of time is avoided. This potential colour
adjustment becomes less relevent as the product ages.
It is recommended that no abrasive cleaners or solvents are used to clean the unit.
Please only use proprietary furniture polishes or alternatively, warm water with
a diluted mild detergent.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
info@casefurniture.com
casefurniture.com
Cross
Sideboard

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Matthew Hilton Cross Sideboard and is the answer not in the manual?

Questions and answers

Summary of Contents for Case Matthew Hilton Cross Sideboard

  • Page 1 Please only use proprietary furniture polishes or alternatively, warm water with a diluted mild detergent. We thank you for purchasing this product and wish you many years of enjoyable and functional use. For more related products please visit: casefurniture.com Case Furniture Ltd London, SW18 2HZ United Kingdom info@casefurniture.com casefurniture.com...
  • Page 2 Assembly Instructions REQUIRED crossbar this way up A x 4 crossbar B x 4 1. Open top of carton fully and turn upside down. 2. Remove all packaging. 3. Open door and remove inner carton containing 4. Loosen bolts in crossbar with Allen key (E) to allow legs and fittings.

Table of Contents