Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Software Update; Resetting The Appliance Network Settings - Bosch WAX28EH1GR User Manual And Installation Instructions

en Home Connect
Press Έναρξη/Προσθήκη
3.
.
ρούχων
a The display shows Delayed start.
Press ⁠ Απομακρυσμένη έναρξη.
4.
a If the display shows Flex Start,
Flex Start is activated and the ap-
pliance waits to be started by the
smart energy system (energy man-
ager).
a If the display changes to : Ready
in approx., the smart energy sys-
tem (energy manager) has estab-
lished a time at which your appli-
ance can start.
a If the smart energy system (energy
manager) does not start the appli-
ance within the set time, the appli-
ance will start the programme itself
before the set time period ends.
The programme ends when the
time period ends.
Note
Flex Start is deactivated for safety
reasons in the following
circumstances:
¡ Press Έναρξη/Προσθήκη
.
ρούχων
¡ Open the door.
¡ Switch off the appliance.
¡ Power failure.
16.5 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold
1.
⁠ Απομακρυσμένη έναρξη for
approx. 3 seconds.
Select Wi-Fi on/off.
2.
Select on.
3.
a Wi-Fi is activated.
56
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
16.6 Deactivating Wi-Fi on the
appliance
Press and hold
1.
⁠ Απομακρυσμένη έναρξη for at
least 3 seconds.
Select Wi-Fi on/off.
2.
Select off.
3.
a Wi-Fi is deactivated
Note: If Wi-Fi is switched off and your
appliance was previously connected
to your home network, this connec-
tion will be re-established automatic-
ally when Wi-Fi is switched back on.
16.7 Software update
Requirement: The display shows A
new software version is available.
Do you want to update the software
now? This may take several
minutes..
Press and hold
1.
⁠ Απομακρυσμένη έναρξη for
approx. 3 seconds.
Select Software update.
2.
Select Install now.
3.
a The software update starts.
Note: The software update may take
several minutes. Do not switch off the
appliance while the software update
is in progress.
16.8 Resetting the appliance
network settings
Press and hold
1.
⁠ Απομακρυσμένη έναρξη for at
least 3 seconds.
Select Network settings.
2.