Advertisement
Quick Links
Advertisement
Related Manuals for Comet S0541
Summary of Contents for Comet S0541
- Page 1 LOGGER S0541 Dual channel temperature logger with two voltage inputs 0-5V Instruction Manual...
- Page 2 Instruction Manual for use of S0541 logger Instrument is designed for measurement and record of temperature from two external temperature probes and two external voltage signals 0-5Vdc. Temperature probes and voltage signals are connected by means of connectors. Measured value of temperature and actual values of voltage inputs are displayed on dual line LCD display and are stored in adjusted time interval to internal non-volatile memory.
- Page 3 COM ADAPTER, for connection via USB port it is necessary to use USB ADAPTER. Connect adapter connector to proper computer port and plug the adapter to the guide slots on the side of logger. IE-LOG-S0541-03...
- Page 4 00.00, i.e. at the beginning of the day. First storing is performed at 6.00,12.00, 18.00 or 00.00hour - at the hour from the above nearest to the logging start. After communication with computer or after start by magnet logger automatically waits for the IE-LOG-S0541-03...
- Page 5 1 temperature (°C 1) at the LCD upper line, channel 2 temperature (°C 2) at the LCD lower line. Symbol LOG indicates data logging in progress – if it blinks, data memory is filled up to more than 90%. Other measured or calculated values are displayed always after 5 seconds. IE-LOG-S0541-03...
- Page 6 OFF, resp. MIN/MAX memory would be cleared! Display reading initialized by magnet goes out automatically after 30 s. Remove the magnet from slots anytime during actual reading is ON or later. Temporary displaying of actual reading by magnet IE-LOG-S0541-03...
- Page 7 ON the logger from the computer. Notice: It is not possible to combine function switching OFF by magnet and MIN/MAX memory clear by magnet! User software enables only one of them to select. IE-LOG-S0541-03...
- Page 8 25% it is also recommended to replace the battery. Applied is Lithium battery 3.6 V, size AA. Battery is located under logger lid. Warning: near battery fragile glass reed contact is located – be careful not to damage it. Be careful in battery replacement! IE-LOG-S0541-03...
- Page 9 EN 55011 Class B immunity: EN 61000-4-2 (levels 4/8 kV, Class A) EN 61000-4-3 (intensity of electric field 3 V/m, Class A) EN 61000-4-4 (levels 1/0.5 kV, Class A) EN 61000-4-6 (intensity of electric field 3 V/m, Class A) IE-LOG-S0541-03...
Need help?
Do you have a question about the S0541 and is the answer not in the manual?
Questions and answers