Table of Contents
Advertisement
→ "Preparing the condensation con-
tainer for the appliance care pro-
gramme", Page 40 in reverse order,
after both the intensive and regular
cleaning processes.
17.5 Preparing the appliance
for the intensive appli-
ance care programme
If the appliance is not used for more
than one month, stubborn dirt or
odours may occur. To remove this,
you can run an intensive appliance
care programme.
Note: The intensive appliance care
programme runs for approximately 4
hours. The programme may take
longer if you do not carry out the ne-
cessary steps in good time while the
programme is running.
Once it has started, the intensive ap-
pliance care programme should not
be cancelled.
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 40.
¡ The appliance care programme
has started.
→ "Starting the appliance care pro-
gramme", Page 41
Press
.
▶
a "CP2" and the programme dura-
tion alternate on the display.
17.6 Running the intensive
appliance care pro-
gramme
Pull out the condensation con-
1.
tainer horizontally and empty it.
Pour a bottle of the original appli-
2.
ance care product
→ "Accessories", Page 28 and ap-
prox. 1 ½ litres of warm tap water
into the condensation container.
Hold the full condensation con-
tainer level so that no liquid spills
out.
Appliance care en
43
Advertisement
Table of Contents
