Settings; Main Window - Minolta Dimage A1 Instruction Manual

SETTINGS

MAIN WINDOW

Live image
Indicator area
DiMAGE Viewer
Live image:
Quit button:
Histogram:
Connect/Disconnect:
DiMAGE Viewer:
Indicator area:
Release button:
For the detail of each operation, refer to the camera's manual.
10 SETTINGS
Basic tab (p. 12)
Flex Focus Point / White balance display (p. 19)
Release button
Displays the image the camera is capturing.
Quits the software.
The dark area of the histogram shows the luminance distribution of the
recorded image from black (left) to white (right).
Switches connection and disconnection between the camera and the
computer.
If the DiMAGE Viewer is already installed, clicking this button will start
up the DiMAGE Viewer.
Settings of the camera are shown here.
Placing the mouse cursor over this button acts the same as pressing
the camera's shutter-release button partway down and activates the
autofocus and autoexposure system; the edge of the button turns
green. Click the button to take a picture, see page 20.
Exposure tab (p. 15)
Color tab (p. 17)
Focusing screen selection (p. 19)
Quit
Histogram
Focus modes (p. 11)
Connect / Disconnect
Preferences (p. 21)
Quit