Stopwatch - Seiko 7T12 Instructions Manual

STOPWATCH

l The stopwatch can measure up to 60 minutes in 1/5-second increments.
l After 60 minutes, it will start counting again from "0" repeatedly up to 12 hours.
l Split time measurement is available.
STOPWATCH minute hand
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
* If the STOPWATCH hands do not return to the "0" position when the stopwatch is reset to "0",
follow the procedure in "SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND
POSITION".
10
A
STOPWATCH
1/5-second hand
B
<How to reset the stopwatch>
While the STOPWATCH hands are moving
1. Press Button A to stop the stopwatch.
2. Press Button B to reset the stopwatch.
While the STOPWATCH hands are stopped
One of the following stopwatch operations has been made. Reset the stopwatch
accordingly.
[When the stopwatch is stopped]
1. Press button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is
measuring]
1. Press button B to release the split time display. The stopwatch hands
move quickly, and then indicate the measurement in progress.
2. Press button A to stop the stopwatch.
3. Press button B to reset the stopwatch.
[When the split time measurement is displayed and the stopwatch is
stopped]
1. Press button B to release the split time display. The stopwatch hands
move quickly, and then stop.
2. Press button B to reset the stopwatch.
11