Master/Slave Master Clock Selection; Examples - miniDSP EQ901 Series User Manual

5.6 M /S
ASTER LAVE MASTER CLOCK SELECTION
The MCLK jumper, located in the center of the board, selects the source of the master clock:
•
If the board is used standalone, it generates its own master clock. In this case, the jumper must be in the
Master position.
•
If the board is used with an external device that generates the I2S signals, the board must slave to the
external clock. In this case, the jumper must be in the Slave position.
5.6.1

Examples

Board used standalone or with miniAMP only
Set jumper to Master.
Board used with miniDIGI, or with miniDIGI+miniAMP
Set jumper to Slave.
Board used with USB interface and direct I2S connection
Set jumper to Slave.
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice
43