Loctek ET118W-N Installation Manual

Item No.: ET118W-N
Installation guide
Component list
1. Tabletop X1
1
2. Lifting columns X1
3. Feet X2
4. Power plug X1
2
Accessory list
Attention: The drawings below are for guidance only and they may differ
slightly from the product and fittings received. Please contact our customer
service department should you have any queries.
A B C D
x1
x8
x8
Cable clamp
M8 5x5
M6
Technical data
Max. Weight Capacity
50KG
Height Range
720-1210mm
Drawer Stroke
230mm
Charging Ports/ Child Lock
4
Install the tabletop and
STEP 1
the lifting columns
B
x8
C
5x5
2
1
x2
STEP 2
Install the feet
A
x8
C
5x5
Use a hexagon allen key(C) and M6 screws(Ax8) to install the feet
to the lifting columns. Pay attention to the orientation.
STEP 3
Install the motor and power lines
4
3
Connect the motor plug to the control box, then connect one side of the adapter plug to
the adapter, another side to the power line.
Note: the motor and power lines can be fixed by cable clamp according to actual use.
Use a hexagon allen key(C) and M8 screws to assemble the
tabletop(1) and lifting columns(2).
Note: Do not touch the surface directly to the ground during
installation to avoid scratching the tabletop by sharp objects.
C
A
3
C
B