When The Sub Dial, Day Hand, Date, Indicator Hand Or Hour/Minute/Second Hand Position Is Misaligned - Seiko ASTRON 8X53 GPS SOLAR Complete User Manual

Hide thumbs Also See for ASTRON 8X53 GPS SOLAR:
Table of Contents

Advertisement

7
TROUBLESHOOTING

When the sub dial, day hand, date, indicator hand or hour/minute/second hand position is misaligned

Points to be checked
● Reception was successful (the reception result is displayed as "Y"),
but time has gained or lost.
• Check the time zone setting.
 Check the time zone setting and DST (Daylight Saving Time)
setting.
P. 21
If the currently set time zone does not correspond to the region where you are, set the time
zone by either of the following operations.
Place where GPS signals can be easily received
Place where GPS signals cannot be received
• Check DST (Daylight Saving Time) setting.
 Check the time zone setting and DST (Daylight Saving Time)
setting
P. 21
If DST (Daylight Saving Time) setting does not correspond to the addition conditions of
DST (Daylight Saving Time) of the region where you are, set DST (Daylight Saving Time)
with reference to "Set DST (Daylight Saving Time)
• Automatic time adjustment function may not have been activated
for a few days.
 Automatic time adjustment
The automatic time adjustment function is unlikely to be activated due to low energy
stored in the watch or depending on the environment.
To immediately adjust the time, refer to "How to adjust the time zone
Preliminary position
When the watch is unable to display the precise time or date, or the sub
dial, day hand or indicator hand does not point to the correct position even
when it has successfully received GPS signals, the preliminary position
may be misaligned.
How to adjust the time zone
P . 18
How to manually set the time zone
P . 23
P .
19. "
P. 27
P .
18. "
ASTRON 8X53 GPS SOLAR           
The preliminary position is misaligned due to the following reasons.
Strong impact such as dropping
or hitting
When comparing the state of "Misaligned Preliminary Hand Position" to that of a weight scale, it is
like "a scale which is unable to display the correct weight because its needle is not set to the zero
position before weighing. "
Adjusting the preliminary position of the hour, minute
and second hands (Automatic hand position adjustment
function)
The hour, minute and second hands have an "automatic hand position adjustment function, "
which automatically corrects an incorrect preliminary position.
The automatic hand position adjustment function is activated once a minute for the second hand
and at 12:00 both for the AM and PM for the hour and minute hands.
 This function works when the preliminary hand position is misaligned due to external factors
such as strong impact or magnetic influence. It does not work to adjust accuracy of the watch or
slight misalignment which may occur during the manufacturing process.
 The preliminary position of the hour and minute hands can be manually adjusted.
Adjust the preliminary position of the sub dial, day hand, date, indicator hand, and hour/
minute hands
P . 45
Adjusting the preliminary position of the sub dial, day
hand, date, and indicator hand
Since the preliminary position of the sub dial, day hand, date, and indicator
hand is not automatically adjusted, it must be adjusted manually.
Adjust the preliminary position of the sub dial, day hand, date, indicator hand, and hour/minute
hands
P . 45
44
Things around you which generate magnetism
 Examples of common magnetic products that may
affect watches
P. 36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents