How.to.read.the.direct.drive.indicator - Seiko SRX011P1 Quick Start Manual

. Continue to turn the crown to sufficiently charge the watch.
The direct drive indicator hand moves up and down to display the electric power generation
✽
status.
When you stop turning the crown, the indicator hand displays the amount of power gener-
✽
ated by the current manual winding for approximately 4 seconds, and then the hand returns to
display the total amount of power reserve. Charge the watch until the indicator hand points at
the second marking above "0"(approximately 6 hours of power reserve).
This watch will keep on operating for approximately 1 month (30 days) if it is fully charged.
✽
However, it is not necessary to charge the watch fully, as it is charged automatically while it is
worn on your wrist.
Refer to "How to read the direct drive indicator" for further details.
✽
Power generation
status display
8
Power reserve display
Generated power
amount display
HOW TO READ THE DIRECT DRIVE INDICATOR
The direct drive indicator can be used to check the following:
(1) Power reserve amount (continuous operating time)
() Real-time power generation status and newly generated amount of power
while charging the watch
Standby position
Scale marking
"M+1" position
Power reserve/
generated power scale