Improper Function; Rotating Bezel - Seiko SSC141P1 Instructions Manual

IMPROPER FUNCTION

When an abnormal display appears, follow the procedures below to reset the built-
in IC. The watch will resume its normal operation.
<HOW TO RESET THE IC>
1. Pull out the crown to the second
click.
2. Keep pressing down Button A and
B for 3 seconds or longer.
3. P u s h t h e c r o w n b a c k i n t o t h e
normal position and check if the
s m a l l s e c o n d h a n d m o v e s a s
normal.
• Resetting the IC will initialize the watch. Before starting to use the watch, it will be
necessary to set the time and adjust the STOPWATCH hands to the "0" position.
Refer to "SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND
POSITION" section of this manual.
24
A
60
45 15
MIN.
30
60
CROWN
30
12
9 3
ALARM
6
B
ROTATING BEZEL (for models with rotating bezel)
The rotating bezel can show up to 60 minutes of elapsed time.
l
1 Turn the rotating bezel to align its "
mark with the minute hand.
2 Read the number on the rotating bezel
that the minute hand points to.
Note: For some models, the rotating bezel rotates only counterclockwise.
"
Start
Elapsed time
30 minutes have
elapsed.
25