3-Control Panel - Haier HWD100-BP14959S8 User Manual

3-1
/
4
1 "Power" button
2 Programme selector
Note : Acoustic signal
In following cases an acoustic signal sounds:
when pressing a button
at the end of program
when selecting the program
in case of failures
The acoustic signal can be deselected if necessary; see DAILY USE.
3-2
3-3
I-Refresh
3-4
3 Display
4 Detergent / Softener drawer
3.1 "Power" button
Touch this button (Fig.3-2) gently to swicth on the
appliance, the display is shining, press it again for
about 2 seconds to swicth off. If no panel element
or programme is activated after a while machine
will shut down automatically.
3.2 Programme selector
By turning the knob (Fig. 3-3),you may choose one
from the 12 programme and the corresponding
programme LED icon will light up.
3.3 Display
The display (Fig. 3-4) shows following information:
Washing time
End time delay
Error codes and service information
I-Refresh
Display symbols
Speed,Temperature,etc

3-Control panel

5
6
I-Refresh
3
1
2
5 Function buttons
6 "Start/Pause" button
8