First Time Auto Tuning - Panasonic JZ1000G Series Operating Instructions Manual

First time Auto
Tuning
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
These steps are not necessary if the setup has been
≥
completed by your local dealer.
Please complete connections (p. 12 - 15) and settings
≥
(if necessary) of the connected equipment before
starting Auto Tuning. For information about the
settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
≥Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home
∫ How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
Select your country
Select [Home]
Select [Home] for use in a home viewing environment.
≥
≥
Set up the network connection
Tick the TV signal mode to tune, and then select
[Start Auto Tuning]
≥
Select your region (Digital TV)
Enter your postcode
∫ When you select the analogue TV signal,
≥
If tuning has failed check the RF cable, and the network
connection, and then follow the on-screen instructions.
≥
Shop
≥
≥
≥
[Shop] is for shop display.
To change the viewing environment later on, the set
will need to have all settings initialised by accessing
[Shipping Condition].
If you use an RF selector, switch it to the digital TV
signal before starting the Auto Tuning. As soon as the
digital TV scan is finished, switch it to the analogue TV
signal to tune analogue channels. Even if some
channels are not tuned correctly, you can try to tune
them by [Auto Tuning] in the [Setup] menu.
Indonesia
select your area.
When selecting [CATV/Other], press the OK button,
and then select the Channel Plan from Indian CATV,
South Africa, American System, American CATV or
Japan CATV.
Auto Tuning is now complete and the
TV is ready for viewing.
Note
The TV goes into Standby mode when no signal is
received and no operation is performed for 10 minutes
if [No signal Power off] in the Timer menu is set to [On]
(factory setting).
To retune all channels
[Auto Tuning] in [Tuning Menu] ([Setup] menu)
To add the available TV signal mode later
[Add TV Signal] in [Tuning Menu] ([Setup]
menu)
To initialise all settings
[Shipping Condition] in [System Menu] ([Setup]
menu)
Malaysia
21
English