Panasonic JZ1000G Series Operating Instructions Manual page 13

Basic connections
∫ AV devices
(DVD Recorder / Blu-ray Recorder, Set top box, etc)
For details, refer to [eHELP] (Search by Purpose >
≥
Watching > Basic > Basic connection).
∫ Aerial
Special notices for receiving digital terrestrial
services
If you receive analogue and digital TV signals through
≥
two separate aerials, use an RF mixer to mix them.
TV
RF cable
RF mixer
Aerial (Analogue TV)
Aerial (Digital TV)
If you receive analogue TV signals through a cable TV
≥
network, an aerial is required to receive digital TV
signals.
In this case, using an RF mixer is not recommended
because the TV signals interfere with each other.
≥ An RF selector is available to switch analogue and
digital TV signal.
TV
RF cable
RF selector
Aerial (Digital TV)
TV
RF cable
Aerial
For Digital TV, Analogue TV
≥
≥ Keep the space between the TV and RF cable to
prevent distorted image.
Cable
(Analogue TV)
Do not put the RF cable close to the mains lead to
≥
avoid noise.
Do not place the RF cable under the TV.
≥
An aerial, correct cable (75 Ω coaxial) and correct
≥
terminating plug are required to obtain optimum
quality picture and sound.
If a communal aerial system is used, you may require
≥
the correct connection cable and plug between the
wall aerial socket and the TV.
Your local Television Service Centre or dealer may be
≥
able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
≥ Any matters regarding aerial installation, upgrading of
existing systems or accessories required, and the
costs incurred, are the responsibility of you, the
customer.
To obtain optimum quality picture, select either an
≥
Aerial or a cable TV network.
∫ Mains lead
(JZ1000G series)
Mains lead
(JZ1000K series)
(JZ1000M series)
(JZ1000S series)
(JZ1000T series)
Mains lead
JZ1000M series / JZ1000S series: AC 110-240 V,
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz*
Mains lead
AC 220-240 V
50 / 60 Hz
English
13