Alarm Off - ClearSounds SW200 Operating Manual

6. The current On/Off selection for the Sound Alarm
(r1=On/Off) will blink. Press Up
select On or Off and then Press Set Alarm
7. If you select On, the current pattern for the sound alarm
(P1-P3) will blink (if selecting Off, skip to step 8).
Press Up
pattern and then Press Set Alarm
8. The current On/Off selection for the LED/Lamp Flashing
(F1=On/Off) will blink. Press Up
select On or Off and then Press Set Alarm
The alarm setting is now complete and will show the
current time.
Please Note: At any point, you can press Return
save and exit.
SNOOZE KEY
█
When your clock alarm activates, you can temporarily turn it
off using the Snooze key. The Snooze key will stop the alarm
for 5 minutes. After 5 minutes, the alarm will activate again.
You can continue to press the Snooze key for a total of 1 hour
after which the alarm mode will be automatically switched off.
The Snooze key is located on the top of the clock.
ALARM OFF KEY
█
When your clock alarm activates, it will continue for 5
minutes if no key is pressed. If you press Set Alarm
the alarm will turn off and it will reset to activate at the
same time the next day.
or Down
14 – ENGLISH
or Down
to select the desired sound
.
or Down
to
.
to
.
to
,