Table of Contents
Advertisement
Quick Links
Model ______________
SWTC1711 series
WARNING
!
Read all precautions and
instructions in this manual before
using this equipment. Save this
manual for future reference.
Maximum user weight
200
IMPORTANT
!
Trampoline / Enclosure's are
susceptible to winds. Be sure to
your Trampoline / Enclo
secure
Wind Damage is not covered
warranty of your trampo
line.
lbs.
-
sure.
in the
User's Manual
17' Oval
Enclosure
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Skywalker SWTC1711 Series
Summary of Contents for Skywalker SWTC1711 Series
- Page 1 User’s Manual 17’ Oval Enclosure Model ______________ SWTC1711 series WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight lbs. IMPORTANT Trampoline / Enclosure’s are susceptible to winds. Be sure to your Trampoline / Enclo sure.
-
Page 2: Table Of Contents
Model SWTC1711 series A serial decal is found on one of the trampoline legs. Model number decal tag is located on the jumping mat CONTENTS Use instructions...........3 Warning Label Placement........4 Before You Begin..........4 Enclosure Safety Information .......5-7 Assembly...............8-11 Care and Maintenance...........12 Exploded Drawing and Parts List ......13... -
Page 3: Use Instructions
USE INSTRUCTIONS 12. This trampoline enclosure is made for users who do not WARNING: To reduce the risk of serious injury, read weigh more than 200 pounds and children less than 6 years and follow all of the warnings, precautions, and instructions old should not use it or go on it. -
Page 4: Warning Label Placement
(not included). BEFORE YOU BEGIN Thank you for selecting a Skywalker Trampolines Oval Enclosure. The Enclosure, when combined with a properly placed and maintained trampoline, will provide many years of backyard fun. Your trampoline enclosure comes equipped with warnings and instructions for the assembly, care, maintenance, and use of the enclosure. -
Page 5: Enclosure Safety Information
WARNING ENCLOSURE SAFETY INFORMATION NEED FOR TRAMPOLINE ENCLOSURE SAFETY A trampoline enclosure is a recreational product. The information on this page and on pages 6-7 identify important safety precautions. The precautions are not all- inclusive, because an enclosure can be used in ways that this manual cannot cover completely. To prevent pinches and cuts during enclosure use, a frame pad must be installed on the trampoline. - Page 6 WARNING Hazards Associated with High Winds A trampoline with an enclosure can be moved or blown over by high winds. Anyone in its path, or inside of the enclosure, may be injured if this happens. If you expect high winds, take down the enclosure netting and stake the trampoline frame to the ground (see page 10), or move the trampoline and enclosure to a sheltered location.
- Page 7 Wear clothing that does not have drawstrings, hooks, loops or anything else that could get caught while using the trampoline/enclosure and result in entanglement or strangulation, or both. Do not attach anything to the netting that is not a Skywalker Trampolines approved accessory or part of the of the trampoline enclosure.
-
Page 8: Assembly
ASSEMBLY ASSEMBLY (PUTTING THE ENCLOSURE TOGETHER) IMPORTANT ASSEMBLY INFORMATION • Need phillips screw driver (included). • Assembly requires two adults. Keep children away from the trampoline enclosure until it is completely put together. • Use gloves to protect your hands from pinch points while putting the enclosure together. •... - Page 9 Lay the Jump mat on the ground. Put enclosure mesh V-ring (7) on the jump mat. Note: If you purchased the Skywalker Trampoline Warning label Combo, the enclosure was pre-installed on the Bed (Mat) Opening of at the factory. Inspect the attachments of the enclosure the enclosure Netting to the trampoline mat (bed).
- Page 10 Poles Note: In Step 6 you will secure the enclosure poles to the frame of the trampoline. Start from the enclosure door, lift one of the poles assembled in Step 1, see the insert drawing. Insert the Straight Tube(5) Enclosure into the top hole of the Square Socket on trampoline frame Door as shown.
- Page 11 . Insert the end cap(3) into the bottom hole of the Socket. socket Insert end cap(3) into end of Socket Your trampoline enclosure is now fully assembled (put together). Make sure that all parts are securely attached. Familiarize yourself and all users with the trampoline and enclosure with the safety precautions, use and instructional materials, and care and mainte- nance instructions in this manual before using the...
-
Page 12: Care And Maintenance
WARNING CARE AND MAINTENANCE TRAMPOLINE ENCLOSURE CARE AND MAINTENANCE To avoid damage to the trampoline and enclosure, do not allow pets or animals inside the enclosure. Appropriate shoes should be worn inside the enclosure to reduce wear to the trampoline mat (bed). Follow the tram- poline manufacturer’s recommendations. -
Page 13: Exploded Drawing And Parts List
EXPLODED DRAWING AND PARTS LIST . y t . y t Pole Cap M5x50mm Bolt Mesh with straps End Cap t - f w(1 spare parts) Screw Driver (screw driver included with Trampoline parts ) s ’ r # These parts are not illustrated. Specifications are subject to change without notice... -
Page 14: Limited Warranty
Skywalker Holdings, LLC authorized service center, or to products used for commercial or rental purpose. No other Warranty beyond that specifically set forth above is authorized by Skywalker Holdings, LLC.
Need help?
Do you have a question about the SWTC1711 Series and is the answer not in the manual?
Questions and answers