Base Selection; Out Of Range Alarm - ClearSounds A1600E Operating Manual

If successful, the handset settings will be reset to the initial
factory settings, otherwise the settings will remain. After
resetting, the handset will return to standby mode.

Base Selection

█
This function allows you to select a base from those already
registered to the handset. To select a base:
1. Press
the main menu list.
2. Press up
press
3. Press up
press
4. Press up
then press
non-existent base, the handset will sound a warning tone.
5. The display will show Searching and then BS Selected.
The display will automatically return to the previous
menu screen.

Out of Range Alarm

█
This function allows you to know when the handset is out of
range of the base, and a beep will sound. Your ClearSounds®
A1600E comes from the factory preset for Out of Range Alarm
ON. To change this setting:
1. Press
the main menu list.
2. Press up
press
3. Press up
press
4. Press down
press
5. Press up
press
under the word Menu on the screen to display
or down
under the word Select.
or down
under the word Select.
or down
under the word Select. If you select a
under the word Menu on the screen to display
or down
under the word Select.
or down
under the word Select.
to select Out of Range and then
under the word Select.
or down
under the word Select.
to scroll to HS Settings and then
to scroll to Select Base and then
to select the base you want and
to scroll to HS Settings and then
to scroll to Tone Setup and then
to select On or Off and then
12 – ENGLISH