Using Exposure Metering - Kodak EasyShare P850 zoom User Manual

Doing more with your camera

Using exposure metering

Choose a metering system in PASM or C1, C2, C3 mode for the appropriate lighting
of your subject.
NOTE: For rapid setting changes, see
Icon Exposure metering options
Multi-Pattern (default)—evaluates the lighting conditions at various
points throughout the image to give an optimum picture exposure. Ideal for
general picture taking.
Center-Weighted—evaluates the brightness over a wide area with
emphasis on the center of the screen.
Center-Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered in the viewfinder. Ideal
when you need an exact exposure of a specific area in the picture.
Selectable Zone—creates an exposure-metering setting from 1 of 25
selected screen locations. If used with Selectable Focus Zone (see
they track together. Use
desired zone.
39
1
2
3
The active icon, except for the
default mode, is displayed in the
EVF/LCD screen.
page 40.
Press Exposure metering.
(Press again to exit.)
to highlight an option.
Press OK or Set.
to move the cross-hair graphic to the
www.kodak.com/go/support
page 51)