Page 3
Misurare l'altezza tra piatto doccia e soffitto. Measure the distance between the plate and the ceiling.
Page 4
Sfilare i componenti, tagliare la parte superiore del tubo come indicato e rimontare i componenti. Remove the components, cut the upper part of the tube as shown and re-assembly the components.
Page 5
Fissare la rondella di plastica al soffitto assicurandosi che sia in asse con il tubo. Fix the plastic washer to the ceiling making sure it is aligned with the tube axis.
Page 6
Posizionare il tubo sul vetro e fissarlo alla rondella. Put the tube on the glass and fix it to the washer.
Page 7
!! ATTENZIONE !! Posizionare la guarnizione corretta a seconda del vetro. La guarnizione non utilizzata può essere gettata. !! ATTENTION !! Put the correct gasket depending on the glass. The remaining gasket may be discarded. 6 mm 8 mm...
PDP will not accept complaints on products which have already been fitted. The fixing kits provided with a PDP shower cabin are suitable for cement and/or brick walls. For walls raised with other kinds of materials (i.e. wallboard), proper fixing elements should be used.