Gigabyte X670 AORUS ELITE AX User Manual page 23

8) LED_C1/LED_C2 (RGB LED Strip Headers)
The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
rating of 2A (12V) and maximum length of 2m.
Connect RGB LED strip to the header. The power pin (marked with a triangle
on the plug) of the LED strip must be connected to Pin 1 (12V) of this header.
Incorrect connection may lead to the damage of the LED strip.
For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page
of GIGABYTE's website.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
9) SATA3 0/1/2/3 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support
RAID 0, RAID 1, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's
website for instructions on configuring a RAID array.
To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's
website and search for "SATA Configuration" for more information.
DEBUG
PORT
DEBUG
PORT
1
LED_C2
1
LED_C1
7
7
2 0
SATA3
3 1
- 23 -
Pin No. Definition
1
2
3
4
RGB LED Strip
1
12V
Pin No. Definition
1
1
2
1
3
4
5
6
7
12V
G
R
B
GND
TXP
TXN
GND
RXN
RXP
GND