PCchips BKi810 Manual page 62

Adjust the flicker filter to at least 80%. The right end of the slider is 100%.
Adjust the position of the screen image using the Position control. Click on the circle
in the middle to automatically adjust the image position and then make further
adjustments with the directional arrows if needed.
4. Click on the Okay button to close the dialog box and return to the Driver Properties
window.
5. Click on the Color tab in the Driver Properties window.
6. Adjust the Gamma Correction controls for Gamma, Brightness and Contrast to the
suggested settings.
Set Gamma to 1.0
Set Brightness to –10
Set Contrast to 45
When you're done, click on the Okay button to confirm the settings and return to the
Display Properties window.
7. Set the Screen area setting in the Display Properties window to 800x600 pixels by
sliding the setting bar to the left. Click the Okay button when you're done.
How to install your system with SCART TV console?
5 – 13